网站建设如何开单,贪玩原始传奇官方网站,外贸是什么意思,网站开发建设计入什么科目实验要求#xff1a;
1、R6为ISP#xff0c;接口IP地址均为公有地址#xff0c;该设备只能配置IP地址#xff0c;之后不能再对其进行任何配置#xff1b; 2、R1-R5为局域网#xff0c;私有IP地址192.168.1.0/24#xff0c;请合理分配#xff1b; 3、R1、R2、R4#x… 实验要求
1、R6为ISP接口IP地址均为公有地址该设备只能配置IP地址之后不能再对其进行任何配置 2、R1-R5为局域网私有IP地址192.168.1.0/24请合理分配 3、R1、R2、R4各有两个环回IP地址R5,R6各有一个环回地址所有路由器上环回均代表连接用户的接口 4、R3下面的两台PC通过DHCP自动获取IP地址 5、选路最佳路由表尽量小避免环路 6、R1-R5均可以访问R6的环回 7、R6 telnet R5的公有地址时实际登录到R1上 8、R4与R5正常通过1000M链路故障时通过100m链路
实验步骤
推荐使用AR2220和AR2240路由器
1、网段划分
首先输入sys 进入系统视图接着输入interface GigabitEthernet0/0/1 进入接口视图
随后ip addres 192.168.1.1ip地址255.255.255.252子网掩码为啥是252因为在192.168.1.0/30这个网段中255.255.255.252表示该子网只有4个IP地址可用其中一个是网络地址、一个是广播地址另外两个是可用地址。
AR1int g0/0/1 IP地址192.168.1.5 30 int g0/0/0 IP地址192.168.1.1 30
配置R1 环回地址 AR2int g0/0/1 IP地址192.168.1.9 30 int g0/0/0 IP地址192.168.1.2 30
配置R2 环回地址 AR3int g0/0/1 IP地址192.168.1.13 30 int g0/0/0 IP地址192.168.1.6 30
给R3配置dhcp服务 AR4int g0/0/1 IP地址192.168.1.14 30
int g0/0/0 IP地址192.168.1.9 30
int g0/0/2 IP地址192.168.1.17 30
int g4/0/0 IP地址192.168.1.21 30 配置R4的环回地址
int l0 然后 ip ad 192.168.1.129 28
int l1 然后ip ad 192.168.1.145 28 AR5int 0/0/2 IP地址192.168.1.22 30
int g0/0/0 IP地址192.168.1.18 30
int g0/0/1 IP地址12.0.0.5 24 AR6int g0/0/0 IP地址12.0.0.6 24 配置R6环回地址 配置R1的静态路由
ip route-static 192.168.1.20 30 192.168.1.2 ip route-static 192.168.1.20 30 192.168.1.6
ip route-static 192.168.1.0 30 192.168.1.2
ip route-static 192.168.1.12 30 192.168.1.6
ip route-static 192.168.1.16 30 192.168.1.2 ip route-static 192.168.1.16 30 192.168.1.6
ip route-static 192.168.1.64 30 192.168.1.2 ip route-static 192.168.1.96 27 192.168.1.6
ip route-static 192.168.1.128 27 192.168.1.2 ip route-static 192.168.1.128 27 192.168.1.6
ip route-static 192.168.1.160 27 192.168.1.2 ip route-static 192.168.1.160 27 192.168.1.6 配置R2的静态路由
[R2]ip route-static 192.168.1.128 27 192.168.1.10 [R2]ip route-static 192.168.1.16 30 192.168.1.10 [R2]ip route-static 192.168.1.160 27 192.168.1.10 [R2]ip route-static 192.168.1.20 30 192.168.1.10 [R2]ip route-static 192.168.1.12 30 192.168.1.10 [R2]ip route-static 192.168.1.96 27 192.168.1.1 [R2]ip route-static 192.168.1.4 30 192.168.1.1 [R2]ip route-static 192.168.1.32 27 192.168.1.1 配置R3的静态路由
[R3]ip route-s [R3]ip route-static 192.168.1.32 27 192.168.1.5 [R3]ip route-static 192.168.1.0 30 192.168.1.5 [R3]ip route-static 192.168.1.64 27 192.168.1.5 [R3]ip route-static 192.168.1.64 27 192.168.1.14 [R3]ip route-static 192.168.1.8 30 192.168.1.14 [R3]ip route-static 192.168.1.128 27 192.168.1.14 [R3]ip route-static 192.168.1.16 30 192.168.1.14 [R3]ip route-static 192.168.1.160 27 192.168.1.14 [R3]ip route-static 192.168.1.20 30 192.168.1.14 [R3]dis ip ro [R3]dis ip routing-table p [R3]dis ip routing-table protocol s [R3]dis ip routing-table protocol static 配置R4的静态路由
[R4]ip rou [R4]ip route-static 192.168.1.96 27 192.168.1.13 [R4]ip route-static 192.168.1.4 30 192.168.1.13 [R4]ip route-static 192.168.1.32 27 192.168.1.13 [R4]ip route-static 192.168.1.32 27 192.168.1.9 [R4]ip route-static 192.168.1.0 30 192.168.1.9 [R4]ip route-static 192.168.1.64 27 192.168.1.9 [R4]ip route-static 192.168.1.160 27 192.168.1.18 [R4]ip route-static 192.168.1.160 27 192.168.1.22 配置R5的静态路由
[R5]ip route-s [R5]ip route-static 192.168.1.128 27 192.168.1.17 [R5]ip route-static 192.168.1.128 27 192.168.1.21 [R5]ip route-static 192.168.1.12 30 192.168.1.17 [R5]ip route-static 192.168.1.12 30 192.168.1.21 [R5]ip route-static 192.168.1.96 27 192.168.1.17 [R5]ip route-static 192.168.1.96 27 192.168.1.21 [R5]ip route-static 192.168.1.4 30 192.168.1.17 [R5]ip route-static 192.168.1.4 30 192.168.1.21 [R5]ip route-static 192.168.1.32 27 192.168.1.17 [R5]ip route-static 192.168.1.32 27 192.168.1.21 [R5]ip route-static 192.168.1.0 30 192.168.1.17 [R5]ip route-static 192.168.1.0 30 192.168.1.21 [R5]ip route-static 192.168.1.64 27 192.168.1.17 [R5]ip route-static 192.168.1.64 27 192.168.1.21 [R5]ip route-static 192.168.1.8 30 192.168.1.17 [R5]ip route-static 192.168.1.8 30 192.168.1.21 检查内网是否通了 现在进行公网通
在R5上配缺省路由ip route-static 0.0.0.0 0 12.0.0.6
检查公网是否通了 避免环路
静态防环机制
[R1]ip route-static 192.168.1.32 27 NULL 0
[R2]ip route-static 192.168.1.64 27 NULL 0
[R4]ip route-static 192.168.1.128 27 NULL 0
R1访问R6 公网上需要进行nat操作
[R5]acl 2000 [R5-acl-basic-2000]rule per [R5-acl-basic-2000]rule permit s [R5-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255 [R5-acl-basic-2000]q [R5]int g0/0/1 [R5-GigabitEthernet0/0/1]nat o [R5-GigabitEthernet0/0/1]nat outbound 2000 [R5-GigabitEthernet0/0/1]
给R1搞缺省
[R1]ip rou [R1]ip route-s [R1]ip route-static 0.0.0.0 0 192.168.1.2 [R1]ip route-static 0.0.0.0 0 192.168.1.6
给R2搞缺省[R2]ip route-static 0.0.0.0 0 192.168.1.10
给R3搞缺省[R3]ip route-static 0.0.0.0 0 192.168.1.14
给R4搞缺省[R4]ip route-static 0.0.0.0 0 192.168.1.18 [R4]ip route-static 0.0.0.0 0 192.168.1.22
现在R1 ping 1.1.1.6 就可以通了
R6登录到R1上
给R1配置远程登陆
[R1]aaa [R1-aaa]lo [R1-aaa]local-user wangdaye ps [R1-aaa]local-user wangdaye pa [R1-aaa]local-user wangdaye password ci [R1-aaa]local-user wangdaye password cipher way12345 pri [R1-aaa]local-user wangdaye password cipher way12345 privilege le [R1-aaa]local-user wangdaye password cipher way12345 privilege level 15 给wangdaye这个用户设置服务类型
R1-aaa]local-user wangdaye ser [R1-aaa]local-user wangdaye service-type telnet [R1-aaa]dis th [V200R003C00] # aaa authentication-scheme default authorization-scheme default accounting-scheme default domain default domain default_admin local-user admin password cipher %$%$K8m.Nt84DZ}e#08bmE3Uw}%$%$ local-user admin service-type http local-user wangdaye password cipher %$%$RK~w)),WiO}jqSIz6p(K!Ja%$%$ local-user wangdaye privilege level 15 local-user wangdaye service-type telnet # return
给用户设置登录通道
[R1-aaa]quit [R1]use [R1]user-in [R1]user-interface vty 0 4 [R1-ui-vty0-4]au [R1-ui-vty0-4]authentication-mode ? aaa AAA authentication password Authentication through the password of a user terminal interface [R1-ui-vty0-4]authentication-mode aaa [R1-ui-vty0-4]quit 给R5配置nat server
nat server protocol tcp global current-interface 23 ins ide 192.168.1.1 23
R6通过公网地址访问 第八个问题
1.查询R1所走的路径[R1]tracert 192.168.1.161 2、修改通过R4的优先级ip ro [R4]ip route-s [R4]ip route-static 0.0.0.0 0 192.168.1.22 pre [R4]ip route-static 0.0.0.0 0 192.168.1.22 preference 61 Info: Succeeded in modifying route. Mar 20 2024 18:41:30-08:00 R4 %%01RM/4/IPV4_DEFT_RT_CHG(l)[0]:IPV4 default Route is changed. (ChangeTypeDelete, InstanceId0, ProtocolStatic, ExitIfGigabitEt hernet4/0/0, Nexthop192.168.1.22, Neighbour0.0.0.0, Preference1023410176, Lab elNULL, Metric0) [R4] [R4] 修改通过R5的优先级[R5]ip route-s [R5]ip route-static 192.168.1.0 30 192.168.1.21 pre 61 Info: Succeeded in modifying route. [R5]ip route-static 192.168.1.4 30 192.168.1.21 pre 61 Info: Succeeded in modifying route. [R5]ip route-static 192.168.1.8 30 192.168.1.21 pre 6 Info: Succeeded in modifying route. [R5]ip route-static 192.168.1.21 30 192.168.1.21 pre 61 Info: The destination address and mask of the configured static route mismatched , and the static route 192.168.1.20/30 was generated. [R5]ip route-static 192.168.1.32 27 192.168.1.21 pre 61 Info: Succeeded in modifying route. [R5]ip route-static 192.168.1.64 27 192.168.1.21 pre 61 Info: Succeeded in modifying route. [R5]ip route-static 192.168.1.96 27 192.168.1.21 pre 61 Info: Succeeded in modifying route. [R5]ip route-static 192.168.1.128 27 192.168.1.21 pre 61 Info: Succeeded in modifying route. 如果没对就关一条路径
进入 0/0/2接口 输入shutdown
