怎么看一个网站是哪个公司做的,上海做网站找谁,企业网站建设高端品牌,wordpress时间调用标签摘 要
由于国内人民生活水平的提高#xff0c;科技不断地进步#xff0c;控制不断地完善#xff0c;从而促使矢量控制技术在电气传动系统领域占据主导权#xff0c;也使得交流异步电机调速控制系统被广泛应用。在交流异步电机调速系统设计领域中#xff0c;矢量控制成为目…摘 要
由于国内人民生活水平的提高科技不断地进步控制不断地完善从而促使矢量控制技术在电气传动系统领域占据主导权也使得交流异步电机调速控制系统被广泛应用。在交流异步电机调速系统设计领域中矢量控制成为目前一处亮丽的风景线因为其开发资源众多开发经验丰富最重要的是成本较低控制在用户可承受的范围内使用坐标变换的方式搭建异步电机调速系统仿真模型从而满足对电机转矩和磁通的控制异步电机调速系统的动态性能逐渐成为世界各国关注的重点。随着矢量控制的异步电机调速控制系统领域的不断革新数量越来越大逐渐成为研究的重点方向因此新一代的我们要认真去研矢量控制构成的交流调速系统。
深入学习异步电机的整体结构和分类针对交流异步电动机调速矢量控制系统当做研究对象。在对交流异步电动机调速矢量控制系统工作原理和各个部分的数学模型进行深入研究的基础上在MATLAB/SIMULINK对不同部件的传递原理和数学模型进行了深入的研究建立矢量控制的异步电机调速系统动力学模型通过仿真结果验证可以比较各种策略与方案优化并确定相关参数。最后对矢量控制的异步电机调速系统分析方法进行了详细比较分析为科学决策提供可靠的依据。
本次设计经过模型搭建、仿真验证在学习掌握异步电机工作特性的同时参考得到的仿真结果为更进一步的设计开发新的产品奠定坚实的基础。
关键词矢量控制调速仿真数学模型异步 Abstract
Due to the improvement of peoples living standard in China, the continuous progress of science and technology, the continuous improvement of control, so as to promote the vector control technology to enter the field of electrical transmission, and make the ac motor speed regulation technology become the leading industry.Represented by the vector control of ac speed regulation technology is a beautiful scenery line, at the present stage because of its development has a mature technology, the cost is relatively small, establishes a model of induction motor speed control system by coordinate transformation, which can be implemented as dc motor torque and flux control of ac speed regulation system of speed control performance can be comparable and dc speed regulating system, thus become the focus of world attention.As the vector control of ac speed control system industry innovation, the number of more and more, gradually become the focus of the research direction, so the new generation of we should seriously study the vector control of ac speed control.
Deeply study the whole structure and classification of asynchronous motor, regard ac asynchronous motor speed vector control system as the research object.In vector control of ac asynchronous motor control system working principle and the mathematical model of each part, on the basis of in-depth study, in the MATLAB/SIMULINK for different parts of the transmission principle and mathematical model studied, vector control of induction motor speed control system dynamic model is established, through the simulation results show, you can compare all kinds of strategy and plan, optimize and related parameters were determined.At last, the analysis method of vector control induction motor speed regulation system is analyzed in detail, which provides a reliable basis for scientific decision.
This design through the model building, simulation verification, in learning to master the asynchronous motor working characteristics, at the same time, reference to the simulation results, for further design and development of new products to lay a solid foundation.
Key words: Boiler; Combustion control; Temperature control; Fluctuation reasons
目录
摘 要.............................................................................. 2
第一章 绪论........................................................................ 5
1.1概述.......................................................................... 5
1.2 交流调速技术的现状........................................... 6
1.3 矢量控制技术的发展........................................... 8
1.4 仿真工具MATLAB/Simulink简介..................... 8
1.5 课题的研究内容及章节安排............................. 10
第二章 基于动态模型的异步电动机调速系统工作原理........................... 11
2.1 异步电动机的数学模型....................................... 11
2.2 异步电动机在两相坐标系上的数学模型........... 15
第三章 交流异步电动机性能的仿真研究...................... 16
3.1 矢量控制结构框图............................................. 16
3.2 在交流情况下异步电动机工作仿真................. 17
3.2.1 工作原理.................................................... 17
3.2.2 交流异步电动机矢量控制调速系统仿真 17
3.2.3 交流异步电动机的仿真波形.................... 18
3.2.4 对异步电动机仿真波形的分析................ 18
第四章 交流异步电动机矢量控制调速系统仿真.......... 19
4.1 交流异步电动机矢量控制调速系统仿真及分析 19
4.2 仿真输出波形及分析......................................... 21
4.3 本章小结............................................................. 25
第五章 结束语................................................................ 26
参考文献............................................................................ 27
致 谢............................................................................ 28 完整论文matlab/simulink建模仿真分析点击如下链接下载
https://download.csdn.net/download/weixin_45905610/88447918
基于矢量控制策略的异步电机调速系统设计资源-CSDN文库
