企业网站的推广方法有哪些,关键词挖掘查询工具爱站网,百度右边相关网站怎么做的,wordpress 菜鸟2.5计划任务/远程管理
一、计划任务
1、计划任务概念解析
在Linux操作系统中#xff0c;除了用户即时执行的命令操作以外#xff0c;还可以配置在指定的时间、指定的日期 执行预先计划好的系统管理任务#xff08;如定期备份、定期采集监测数据#xff09;。RHEL6系统中…2.5计划任务/远程管理
一、计划任务
1、计划任务概念解析
在Linux操作系统中除了用户即时执行的命令操作以外还可以配置在指定的时间、指定的日期 执行预先计划好的系统管理任务如定期备份、定期采集监测数据。RHEL6系统中默认已安装 了at、cronie软件包通过atd和crond这两个系统服务实现一次性、周期性计划任务的功能并 分别通过at、crontab命令进行计划任务设置。 2、计划任务分类
一次性计划任务 循环型计划任务 系统级计划任务 用户级计划任务 3、Crontab详解
安装软件
[rootlocalhost ~]# yum -y install crontabs
启动服务 默认是启动的
rhel5/6:
[rootlocalhost ~]# /etc/init.d/crond status
[rootlocalhost ~]# /etc/init.d/crond start
rhel7:
[rootlocalhost ~]# systemctl start crond.service
[rootlocalhost ~]# systemctl status crond.service
[rootlocalhost ~]# systemctl enable crond.service
开机启动(rhel5/6)
[rootlocalhost ~]# chkconfig crond on创建计划任务用户级别的计划任务
[rootlocalhost ~]# crontab -u 用户 -e
-u 指定用户 默认不写就是root
[rootlocalhost ~]# crontab -e
配置分两部分 拿空格分开
第一部分:时间
分钟 小时 日 月 周
范围 0-59 0-23 1-31 1-12 0-7
上面的时间范围可以查看man手册: [rootlocalhost ~]# man 5 crontab
各种时间写法
5 10 * * *
5 10 8 * *
1 5 7 * 5
1,5,9 * * * *
8-12 * * * *
5-20,40 * * * *
8-12,20-25 * * * *
*/5 * * * *
ps: * 表示每...
, 取不同的时间点
- 表示范围
*/5 每5分钟
第二部分:动作
把上面规定的时间要执行的命令写在这里当然包括脚本(最常用)命令最好要写绝对路径
查看计划任务:两种方法
1)[rootlocalhost ~]# crontab -l
-u 用户名 查看某一个账户的计划任务
2)[rootlocalhost ~]# cat /var/spool/cron/root
计划任务删除:两种方法
1)[rootlocalhost ~]# crontab -r -u wing
-r 删除
-u 指定用户
[rootlocalhost ~]# crontab -e -u tom
2)[rootlocalhost ~]# rm -f /var/spool/cron/root
计划任务的权限控制
[rootlocalhost ~]# cat /etc/cron.deny
如果这个文件存在凡是写到这个文件里面的账户不允许执行crontab命令
[rootlocalhost ~]# cat /etc/cron.allow
如果这个文件存在没有写到这个文件里面的账户不允许执行crontab命令
如果有allow文件那不管deny是否存在都是只允许allow文件里面的用户二、计划任务实战
使用计划任务运行指定应用程序
[rootlocalhost yum.repos.d]# which touch
/usr/bin/touch
[rootlocalhost yum.repos.d]# cd /tmp
[rootlocalhost tmp]# ls
[rootlocalhost tmp]# rm -rf *每分钟创建一个1.txt
[rootlocalhost tmp]# crontab -e
*/1 * * * * /usr/bin/touch /tmp/1.txt[rootlocalhost tmp]# ls
1.txt查看日志
[rootlocalhost tmp]# tailf /var/log/cron 定时重启
[rootlocalhost tmp]# which reboot
/usr/sbin/reboot[rootlocalhost tmp]# crontab -e
00 24 * * * /usr/sbin/rebootcrontab: installing new crontab
/tmp/crontab.udy0yb:2: bad hour
errors in crontab file, cant install.
Do you want to retry the same edit? q
Enter Y or N
Do you want to retry the same edit? ^C删除
[rootlocalhost tmp]# crontab -r查询
[rootlocalhost tmp]# crontab -l
no crontab for root
三、远程管理
1、ssh服务
安装软件
openssh-server 提供服务
openssh-clients 客户端
openssh
[rootlocalhost ~]# yum install openssh* -y
ssh 端口22
服务器端
启动服务
[rootlocalhost ~]# systemctl start sshd
查看
[rootlocalhost ~]# lsof -i:22关闭防火墙和selinux
systemctl stop firewalld
临时关闭
[rootlocalhost tmp]# getenforce 0
Enforcing
[rootlocalhost tmp]# setenforce 0
[rootlocalhost tmp]# getenforce 0
Permissive
这个是永久关闭 重启机器才能生效vi /etc/selinux/config客户端
远程登陆管理
[rootlocalhost ~]# ssh -X tom10.18.44.208 -p 2222
[rootlocalhost ~]# ssh 10.18.44.208
如登陆果账户没有密码默认不能
无密码登陆(ssh密钥认证)client:
产生公钥和私钥
[rootlocalhost ~]# ssh-keygen //一路回车
拷贝公钥给对方
[rootlocalhost ~]# ssh-copy-id -i 10.18.44.208
直接执行远程命令
[rootlocalhost ~]# ssh 10.18.44.208 reboot远程拷贝
需要先安装客户端
[rootlocalhost ~]# cp 源文件 目标路径
谁是远程谁加IP
132的
[rootlocalhost tmp]# touch 1.txt
[rootlocalhost tmp]# ls
1.txt
[rootlocalhost ~]# scp 1.txt 192.168.120.133:/tmp/-P端口
拷贝目录加-r选项
[rootlocalhost tmp]# scp 192.168.120.133:/tmp/1.txt /tmp/
1.txt 100% 0 0.0KB/s 00:00
[rootlocalhost tmp]# ls
1.txt修改端口号
[rootlocalhost ~]# vim /etc/ssh/sshd_config
Port 1000
[rootlocalhost tmp]# systemctl restart sshdPort 22
ListenAddress 192.168.2.8
PermitRootLogin yes
MaxSessions 10 最大并发量
PermitEmptyPasswords no2、rz sz命令
安装 root 账号登陆后执行以下命令 搜索软件包
[rootlocalhost tmp]# yum provides rz[rootlocalhost ~]#yum -y install lrzsz-0.12.20-36.el7.x86_64使用 sz命令发送文件到本地 [rootlocalhost ~]# sz filename rz命令本地上传文件到服务器 [rootlocalhost ~]## rz 执行该命令后在弹出框中选择要上传的文件即可。 3、远程桌面管理
4、Jumpserver
四、Jumpserver详解
1、环境配置
[rootlocalhost ~]# setenforce 0[rootlocalhost ~]# getenforce
Disabled
[rootlocalhost ~]# systemctl stop firewalld.service修改字符集否则可能报 input/output error的问题因为日志里打印了中文
[rootlocalhost ~]# localedef -c -f UTF-8 -i zh_CN zh_CN.UTF-8
[rootlocalhost ~]# export LC_ALLzh_CN.UTF-8
[rootlocalhost ~]# echo LANGzh_CN.UTF-8 /etc/locale.conf[rootlocalhost ~]# yum -y install wget sqlite-devel xz gcc automake zlib-devel openssl-devel epel-release git[rootlocalhost ~]# wget https://www.python.org/ftp/python/3.6.1/Python-3.6.1.tar.xz
解压
[rootlocalhost ~]# tar xf Python-3.6.1.tar.xz cd Python-3.6.1
编译安装
[rootsdp-dev Python-3.6.1]# ./configure make make install
这里必须执行编译安装否则在安装 Python 库依赖时会有麻烦...[rootsdp-dev Python-3.6.1]# cd /opt[rootsdp-dev opt]# python3 -m venv py3
[rootsdp-dev opt]# source /opt/py3/bin/activate(py3) [rootsdp-dev opt]#报错
(py3) [rootlocalhost opt]# git clone git://github.com/kennethreitz/autoenv.git
正克隆到 autoenv...
fatal: unable to connect to github.com:
github.com[0: 20.205.243.166]: errno????
如果失败 可以修复一下
(py3) [rootlocalhost opt]# git config --global url.https://github.com/.insteadOf git://github.com/第二个报错
(py3) [rootlocalhost opt]# git clone git://github.com/kennethreitz/autoenv.git
正克隆到 autoenv...
fatal: unable to access https://github.com/kennethreitz/autoenv.git/: Failed connect to 127.0.0.1:1080; Connection refused
(py3) [rootlocalhost opt]# git config --global --unset https.proxy
(py3) [rootlocalhost opt]# git config --global --unset http.proxy
上述方案要还是无法解决运行以下命令
git config --global http.sslVerify false(py3) [rootsdp-dev opt]# git clone git://github.com/kennethreitz/autoenv.git
正克隆到 autoenv...
remote: Enumerating objects: 671, done.
remote: Total 671 (delta 0), reused 0 (delta 0), pack-reused 671
接收对象中: 100% (671/671), 103.92 KiB | 115.00 KiB/s, done.
处理 delta 中: 100% (356/356), done.(py3) [rootsdp-dev opt]#
(py3) [rootsdp-dev opt]# echo source /opt/autoenv/activate.sh ~/.bashrc
(py3) [rootsdp-dev opt]# source ~/.bashrc
(py3) [rootsdp-dev opt]#2、下载Jumpserver
报这个问题的时候安装了这个
正在解析主机 github.com (github.com)... 20.205.243.166
正在连接 github.com (github.com)|20.205.243.166|:443... 失败拒绝连接。
(py3) [rootlocalhost opt]# yum update nss
按y项目太大无法拉取的问题
(py3) [rootlocalhost opt]# git clone https://github.com/jumpserver/jumpserver.git cd jumpserver git checkout master正克隆到 jumpserver...
error: RPC failed; result7, HTTP code 0
fatal: The remote end hung up unexpectedly
(py3) [rootlocalhost opt]# git config --global http.postBuffer 1048576000(py3) [rootsdp-dev opt]# git clone https://github.com/jumpserver/jumpserver.git cd jumpserver git checkout master
正克隆到 jumpserver...
remote: Enumerating objects: 79, done.
remote: Counting objects: 100% (79/79), done.
remote: Compressing objects: 100% (68/68), done.
remote: Total 41282 (delta 19), reused 20 (delta 5), pack-reused 41203
接收对象中: 100% (41282/41282), 52.05 MiB | 79.00 KiB/s, done.
处理 delta 中: 100% (28176/28176), done.
已经位于 master
(py3) [rootsdp-dev jumpserver]#3、安装所需的python modules
(py3) [rootsdp-dev jumpserver]# echo source /opt/py3/bin/activate /opt/jumpserver/.env
(py3) [rootsdp-dev jumpserver]# cd requirements/
autoenv:
autoenv: WARNING:
autoenv: This is the first time you are about to source /opt/jumpserver/.env:
autoenv:
autoenv: --- (begin contents) ---------------------------------------
autoenv: source /opt/py3/bin/activate$
autoenv:
autoenv: --- (end contents) -----------------------------------------
autoenv:
autoenv: Are you sure you want to allow this? (y/N) y(py3) [rootsdp-dev requirements]#
(py3) [rootsdp-dev requirements]# yum -y install $(cat rpm_requirements.txt)
(py3) [rootsdp-dev requirements]# pip install --upgrade pip
(py3) [rootsdp-dev requirements]# pip install -r requirements.txt4、安装Redis
(py3) [rootsdp-dev requirements]# yum -y install redis
(py3) [rootsdp-dev requirements]# systemctl enable redis
Created symlink from /etc/systemd/system/multi-user.target.wants/redis.service
to /usr/lib/systemd/system/redis.service.
(py3) [rootsdp-dev requirements]# systemctl start redis5、安装MySQL
(py3) [rootsdp-dev requirements]# yum -y install mariadb mariadb-devel mariadbserver
(py3) [rootsdp-dev requirements]# systemctl enable mariadb
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service
to /usr/lib/systemd/system/mariadb.service.
(py3) [rootsdp-dev requirements]# systemctl start mariadb
(py3) [rootsdp-dev requirements]#
(py3) [rootsdp-dev requirements]# mysql
Welcome to the MariaDB monitor. Commands end with ; or \g.
Your MariaDB connection id is 2
Server version: 5.5.60-MariaDB MariaDB Server
Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.
Type help; or \h for help. Type \c to clear the current input statement.
MariaDB [(none)] create database jumpserver default charset utf8;
Query OK, 1 row affected (0.00 sec)
MariaDB [(none)] grant all on jumpserver.* to jumpserveradmin127.0.0.1
identified by jumpserverpwd;
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)] flush privileges;
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)] \q
Bye
(py3) [rootsdp-dev requirements]#6、配置Jumpserver
(py3) [rootsdp-dev requirements]# pwd
/opt/jumpserver/requirements
(py3) [rootsdp-dev requirements]# cd ..
(py3) [rootsdp-dev jumpserver]# ls
apps config_example.yml Dockerfile entrypoint.sh LICENSE README_EN.md
requirements tmp
build.sh data docs jms logs README.md
run_server.py utils
(py3) [rootsdp-dev jumpserver]# cp config_example.yml config.yml
(py3) [rootsdp-dev jumpserver]#
(py3) [rootsdp-dev jumpserver]# SECRET_KEYcat /dev/urandom | tr -dc A-Za-z0-9
| head -c 50
(py3) [rootsdp-dev jumpserver]# echo $SECRET_KEY
vFjo4WEMRWNinXMconEXodf3VeEaRStkDzo6SpIfNxphYEEMUZ
(py3) [rootsdp-dev jumpserver]# echo SECRET_KEY$SECRET_KEY ~/.bashrc
(py3) [rootsdp-dev jumpserver]# BOOTSTRAP_TOKENcat /dev/urandom | tr -dc AZa-z0-9 | head -c 16
(py3) [rootsdp-dev jumpserver]# echo BOOTSTRAP_TOKEN$BOOTSTRAP_TOKEN
~/.bashrc
(py3) [rootsdp-dev jumpserver]# echo $BOOTSTRAP_TOKEN
yBCVQ9WHA9phTZ21
(py3) [rootsdp-dev jumpserver]# sed -i s/SECRET_KEY:/SECRET_KEY:
$SECRET_KEY/g /opt/jumpserver/config.yml
(py3) [rootsdp-dev jumpserver]# sed -i s/BOOTSTRAP_TOKEN:/BOOTSTRAP_TOKEN:
$BOOTSTRAP_TOKEN/g /opt/jumpserver/config.yml
(py3) [rootsdp-dev jumpserver]# sed -i s/# DEBUG: true/DEBUG: false/g
/opt/jumpserver/config.yml
(py3) [rootsdp-dev jumpserver]# sed -i s/# LOG_LEVEL: DEBUG/LOG_LEVEL:
ERROR/g /opt/jumpserver/config.yml
(py3) [rootsdp-dev jumpserver]# sed -i s/# SESSION_EXPIRE_AT_BROWSER_CLOSE:
false/SESSION_EXPIRE_AT_BROWSER_CLOSE: true/g /opt/jumpserver/config.yml
(py3) [rootsdp-dev jumpserver]# echo -e \033[31m 你的SECRET_KEY是 $SECRET_KEY
\033[0m
你的SECRET_KEY是 vFjo4WEMRWNinXMconEXodf3VeEaRStkDzo6SpIfNxphYEEMUZ
(py3) [rootsdp-dev jumpserver]# echo -e \033[31m 你的BOOTSTRAP_TOKEN是
$BOOTSTRAP_TOKEN \033[0m
你的BOOTSTRAP_TOKEN是 yBCVQ9WHA9phTZ21
(py3) [rootsdp-dev jumpserver]# vi config.yml
(py3) [rootsdp-dev jumpserver]# sed -n /^DB_/p /opt/jumpserver/config.yml
DB_ENGINE: mysql
DB_HOST: 127.0.0.1
DB_PORT: 3306
DB_USER: jumpserveradmin
DB_PASSWORD: jumpserverpwd
DB_NAME: jumpserver
(py3) [rootsdp-dev jumpserver]#7、启动/关闭Jumpserver
(py3) [rootsdp-dev jumpserver]# ./jms start
......
(py3) [rootsdp-dev jumpserver]# ./jms stop
Stop service: gunicorn
Stop service: celery
Stop service: beat
(py3) [rootsdp-dev jumpserver]#后台启动
(py3) [rootsdp-dev jumpserver]# ./jms start -d8、部署koko
支持终端管理默认port为2222
[rootsdp-dev ~]# systemctl start docker
[rootsdp-dev ~]#
[rootsdp-dev ~]# Server_IP192.168.20.32
[rootsdp-dev ~]# BOOTSTRAP_TOKENyBCVQ9WHA9phTZ21
[rootsdp-dev ~]# docker run --name jms_koko -d -p 2222:2222 -p 5000:5000 -e
CORE_HOSThttp://$Server_IP:8080 -e BOOTSTRAP_TOKEN$BOOTSTRAP_TOKEN
jumpserver/jms_koko:1.5.5
Unable to find image jumpserver/jms_koko:1.5.5 locally
1.5.2: Pulling from jumpserver/jms_koko
050382585609: Pull complete
f6e2d22aa00f: Pull complete
8c86c00c5332: Pull complete
6b9c6941a89d: Pull complete
a10054b94acf: Pull complete
4005724a64ff: Pull complete
446406ca2953: Pull complete
716a981c63ee: Pull complete
41a65efed49e: Pull complete
Digest: sha256:ac6258fe46165860289410970e124031aa74a380cb3e1ad97348feb2c9265cbc
Status: Downloaded newer image for jumpserver/jms_koko:1.5.5
31fc5862ea104946590c232f16dab366d55823e559e256c5208a3720be9406ba
[rootsdp-dev ~]#手工部署koko (coco 目前已经被 koko 取代)
cd /opt
wget https://github.com/jumpserver/koko/releases/download/1.5.2/koko-master-
37daa82-linux-amd64.tar.gz
tar xf koko-master-37daa82-linux-amd64.tar.gz
chown -R root:root kokodir
cd kokodir
chown -R root:root /opt/kokodir
cd /opt/kokodir
cp config_example.yml config.yml
vim config.yml # BOOTSTRAP_TOKEN 需要从 jumpserver/config.yml 里面获取, 保证一致
./koko9、部署guacamole
基于 HTML 5 和 JavaScript 的 VNC 查看器
[rootsdp-dev ~]# docker run --name jms_guacamole -d -p 8081:8081 -e
JUMPSERVER_SERVERhttp://$Server_IP:8080 -e BOOTSTRAP_TOKEN$BOOTSTRAP_TOKEN
jumpserver/jms_guacamole:1.5.5
Unable to find image jumpserver/jms_guacamole:1.5.5 locally
1.5.5: Pulling from jumpserver/jms_guacamole
8ba884070f61: Pull complete
74b389e6937e: Pull complete
41f5461bfc2f: Pull complete
f693f2484212: Pull complete
246835158fe4: Pull complete
Digest: sha256:de0b74e33c9991181eb507d768df73fb05932f3b4722dc36ecdca4e358fdce8d
Status: Downloaded newer image for jumpserver/jms_guacamole:1.5.5
f4d0c314c5fb840e42ea7e284f5349c571039bb1e3af2f3f8377b7a2c5f53f82
[rootsdp-dev ~]#9手工部署guacamole
$ cd /opt
$ git clone --depth1 https://github.com/jumpserver/docker-guacamole.git
$ cd /opt/docker-guacamole
$ tar xf guacamole-server-1.0.0.tar.gz
$ cd /opt/docker-guacamole/guacamole-server-1.0.0
# 根据 http://guacamole.apache.org/doc/gug/installing-guacamole.html 文档安装对应的
依赖包
$ autoreconf -fi
$ ./configure --with-init-dir/etc/init.d
$ make
$ make install
# 访问 https://tomcat.apache.org/download-90.cgi 下载最新的 tomcat9
$ mkdir -p /config/guacamole /config/guacamole/lib /config/guacamole/extensions
/config/guacamole/data/log/
$ cd /config
$ wget http://mirrors.tuna.tsinghua.edu.cn/apache/tomcat/tomcat-
9/v9.0.22/bin/apache-tomcat-9.0.22.tar.gz
$ tar xf apache-tomcat-9.0.22.tar.gz
$ mv apache-tomcat-9.0.22 tomcat9
$ rm -rf /config/tomcat9/webapps/*
$ sed -i s/Connector port8080/Connector port8081/g
/config/tomcat9/conf/server.xml
$ echo java.util.logging.ConsoleHandler.encoding UTF-8
/config/tomcat9/conf/logging.properties
$ ln -sf /opt/docker-guacamole/guacamole-1.0.0.war
/config/tomcat9/webapps/ROOT.war
$ ln -sf /opt/docker-guacamole/guacamole-auth-jumpserver-1.0.0.jar
/config/guacamole/extensions/guacamole-auth-jumpserver-1.0.0.jar
$ ln -sf /opt/docker-guacamole/root/app/guacamole/guacamole.properties
/config/guacamole/guacamole.properties
$ wget https://github.com/ibuler/ssh-forward/releases/download/v0.0.5/linuxamd64.tar.gz
$ tar xf linux-amd64.tar.gz -C /bin/
$ chmod x /bin/ssh-forward
# 设置 guacamole 环境
$ export JUMPSERVER_SERVERhttp://127.0.0.1:8080 # http://127.0.0.1:8080 指
jumpserver 访问地址
$ echo export JUMPSERVER_SERVERhttp://127.0.0.1:8080 ~/.bashrc
# BOOTSTRAP_TOKEN 为 Jumpserver/config.yml 里面的 BOOTSTRAP_TOKEN 值
$ export BOOTSTRAP_TOKEN******
$ echo export BOOTSTRAP_TOKEN****** ~/.bashrc
$ export JUMPSERVER_KEY_DIR/config/guacamole/keys
$ echo export JUMPSERVER_KEY_DIR/config/guacamole/keys ~/.bashrc
$ export GUACAMOLE_HOME/config/guacamole
$ echo export GUACAMOLE_HOME/config/guacamole ~/.bashrc
$ /etc/init.d/guacd start
$ sh /config/tomcat9/bin/startup.sh10、部署luna
与nginx结合支持Web Terminal前端
[rootsdp-dev ~]# cd /opt/
[rootsdp-dev opt]# wget
https://github.com/jumpserver/luna/releases/download/1.5.5/luna.tar.gz
[rootsdp-dev opt]# tar xf luna.tar.gz
[rootsdp-dev opt]# chown -R root:root luna11、配置nginx
[rootsdp-dev opt]# cd /usr/local/nginx/conf/
[rootsdp-dev conf]# ls
fastcgi.conf koi-utf nginx.conf uwsgi_params
fastcgi.conf.default koi-win nginx.conf.default
uwsgi_params.default
fastcgi_params mime.types scgi_params win-utf
fastcgi_params.default mime.types.default scgi_params.default
[rootsdp-dev conf]# mkdir conf.d
[rootsdp-dev conf]# cd conf.d/
[rootsdp-dev conf.d]# vim jumpserver.conf
[rootsdp-dev conf.d]# ls
jumpserver.conf
[rootsdp-dev conf.d]# cat jumpserver.conf
server {
listen 80;
# server_name _;
server_name bastion.qf.com;
client_max_body_size 100m; # 录像及文件上传大小限制
location /luna/ {
try_files $uri / /index.html;
alias /opt/luna/; # luna 路径, 如果修改安装目录, 此处需要修改
}
location /media/ {
add_header Content-Encoding gzip;
root /opt/jumpserver/data/; # 录像位置, 如果修改安装目录, 此处需要修改
}
location /static/ {
root /opt/jumpserver/data/; # 静态资源, 如果修改安装目录, 此处需要修改
}
location /koko/ {
proxy_pass http://localhost:5000;
proxy_buffering off;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection upgrade;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
access_log off;
}
location /guacamole/ {
proxy_pass http://localhost:8081/;
proxy_buffering off;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection $http_connection;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
access_log off;
}
location /ws/ {
proxy_pass http://localhost:8070;
proxy_http_version 1.1;
proxy_buffering off;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection upgrade;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
access_log off;
}
location / {
proxy_pass http://localhost:8080;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
access_log off;
}
}
[rootsdp-dev conf.d]#
[rootsdp-dev conf.d]# cd ..
[rootsdp-dev conf]# vim nginx.conf
[rootsdp-dev conf]# grep -Pv ^($| *#) nginx.conf
worker_processes 1;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
keepalive_timeout 65;
include /usr/local/nginx/conf/conf.d/*.conf;
}
[rootsdp-dev conf]# cd ..
[rootsdp-dev nginx]# sbin/nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[rootsdp-dev nginx]#12、Jumpserver 登录测试
# 检查应用是否已经正常运行
# 服务全部启动后, 访问 jumpserver 服务器 nginx 代理的 80 端口, 不要通过8080端口访问
# 默认账号: admin 密码: admin13、快速入门
参考
####系统设置
设置用户访问的URL
五、远程管理实战
1、使用ssh管理远程机器
2、部署并使用jumpserver服务器
六总结
rpm_requirements.txt
部署的时候一直缺少这个包 没有找到原因 最终使用了 一键安装 原因找到后在线跟新文档curl -sSL https://resource.fit2cloud.com/jumpserver/jumpserver/releases/latest/download/quick_start.sh | bash安装完成后 JumpServer 配置文件路径为 /opt/jumpserver/config/config.txtcd /opt/jumpserver-installer-v3.1.2
# 启动
./jmsctl.sh start
# 停止
./jmsctl.sh down
# 卸载
./jmsctl.sh uninstall
# 帮助
./jmsctl.sh -h用户名: admin
密码: adminhttp://ip地址:80/core/auth/login/
